Obsidian Group | Instruments for the deep ocean
Move your pointer to light the water

Built forwhere lightgives up.

10,935metres below the surface

Pressure at this depth is 1,100 bar. Every instrument we sell has been to a depth like it.

Obsidian Group builds sensors, samplers and vehicles for people who work below the last sunlight. Titanium, patience and a very long test tank.

Instruments that keep their shape under a mountain of water

Eight instruments, each pressure tested twice before it leaves Geneva. Open any card for the full drawing, specifications and stock position.

In stock, 9 ready
6,000metres rated
Sensors

Abyss Sounder Mk II

Multibeam sonar that draws the seafloor in fine grain.

$18,400
In stock, 27 ready
4,000metres rated
Sensors

Halocline CTD Probe

Conductivity, temperature and depth in a pocket sized titanium body.

$6,200
Low stock, 2 left
11,000metres rated
Vehicles

Trench Lander

A free falling lander that works the hadal floor for a month, then floats home.

$212,000
In stock, 6 ready
1,000metres rated
Vehicles

Kelp Runner ROV

A compact tethered vehicle that fits in a checked case and a small boat.

$38,500
Low stock, 5 left
6,500metres rated
Sampling

Sable Core Sampler

Sediment corer that returns the seabed in the order it was laid down.

$14,900
In stock, 11 ready
4,000metres rated
Sampling

Brine Carousel

Twenty four bottles, fired by depth, time or a command from the deck.

$9,750
In stock, 33 ready
6,000metres rated
Power and light

Lumen Array

Dimmable lighting with a warm white that shows true colour on the seabed.

$3,900
Out of stock
11,000metres rated
Power and light

Cell Vault Pack

Oil filled battery that shrugs off pressure that would crush a sealed case.

$5,600

Choose a depth. We will tell you what it does to steel.

Drag the dial from the surface to the Challenger Deep. The console works out pressure, temperature and light, then builds a kit from what is on our shelves.

0metres
Sunlight zone
Pressure1bar
In pounds per square inch15psi
Water temperature20.0degrees C
Daylight remaining100percent
Load on every square metre of hull10tonnes, about 7 family cars
What it feels like

Photosynthesis lives here. Divers, kayaks and the Kelp Runner all work in this layer.

Suggested kit for 0 metres

$58,350
SensorsHalocline CTD Probe

Rated to 4,000 metres. Conductivity, temperature and depth in a pocket sized titanium body.

$6,200
VehiclesKelp Runner ROV

Rated to 1,000 metres. A compact tethered vehicle that fits in a checked case and a small boat.

$38,500
SamplingBrine Carousel

Rated to 4,000 metres. Twenty four bottles, fired by depth, time or a command from the deck.

$9,750
Power and lightLumen Array

Rated to 6,000 metres. Dimmable lighting with a warm white that shows true colour on the seabed.

$3,900

Inside the Trench Lander

A free falling lander that rides a ballast weight down, works on the seabed for weeks, then drops its ballast and floats home. Touch a numbered point to read the part.

2.4 m tall Scale 1 to 20. Section through the vertical axis.

Titanium sphere

A sphere spreads pressure evenly in every direction, which is why it is the shape of choice for the deepest work. Ours is forged in two halves, machined, welded and then pressure tested twice.

Wall thickness31 mm
Test pressure1350 bar

Put three instruments side by side

Pick any three from the catalogue. The table lines up every number a purchasing desk asks for, and can mark the best value in each row.

Choose the instruments to compare in the header row.
Specification
CategorySensorsVehiclesVehicles
Rated depth6,000 m1,000 m11,000 m
Weight in air38 kg in air94 kg1240 kg
EnduranceContinuous, 240 hoursSix hours per diveUp to 30 days on the seabed
Power24 V deck cable or packTether, 3 kWCell Vault stack, 18 kWh
MaterialTitanium grade 5Anodised aluminium, titanium fittingsTitanium sphere, syntactic foam float
Lead time3 weeks8 weeks16 weeks
Warranty3 years2 years5 years
StockIn stock, 9 readyIn stock, 6 readyLow stock, 2 left
Price$18,400$38,500$212,000

Notes from the field

Long form writing from the bench, the test tank and the decks of ships that carry our work. Open a story to read it here.

From first message to first dive

Most orders take between two and sixteen weeks. Here is what happens in that time, and who you will hear from.

Day 1BriefYou tell us the depth, the payload and the ship. An engineer replies within one working day.
Weeks 1 to 12BuildTitanium is forged, machined and welded in Geneva. You get a photograph every Friday.
Nine daysTestTwo pressure tests, a thermal cycle and a full electronics burn in.
Three daysShipCrated, insured and cleared for export. We handle licences and customs paperwork.
Every diveSupportCalibration, spares and a named engineer who answers when a dive goes sideways.

Request a dive brief

Tell us where you are going and what you need to bring back. An engineer replies within one working day with a kit, a lead time and honest questions.

Bench desk desk@obsidian.group Telephone +41 22 555 0148 Address Quai des Abysses 12, 1201 Geneva Hours Monday to Friday, 08:00 to 18:00 Central European Time